妥思空调末端系列
  欧文托普阀门系列
  霍尼韦尔楼宇自控
 
 
 
 
As-I-System-描述和功能
AS stands for „actuator sensor,” and thus the „AS interface” is in fact the actuator sensor interface. The AS interface, which complies with EN 50295 and IEC 62026-2 norms, is an open and vendor-independent Bus system for the lowest field level of automation technology.
The AS interface provides optimally priced connections of sensors and actuators to higher-level systems, as well as a stand-alone Bus solution that minimizes costs.
The Trox company uses AS interface for fire protection, smoke extraction and volume flow regulation applications.
„Introduction to the AS interface” gives you an overview of the system’s performance capabilities.
„Trox components for the AS interface” describes the components that are used for fire protection and smoke extraction applications in the AS interface system.
In „Planning with the AS interface”, four practical examples provide you with basic information about planning an AS interface Bus system.
Examples of calls for tenders that evolve out of the planning process can be found in the „Tenders”section.
The „Commissioning” section describes the wiring and addressing of the Bus components, as well as the connections between the AS interface and higher level systems such as Siemens (Landis and Staefa), Sauter, Kieback and Peter, Messner, LON etc.
Fire protection applications of the AS interface are discussed in the „Projects” section, which describes two such undertakings.
Our „List of references” provides you with an overview of projects that have been realized in the past (as at December, 2000).
The „Appendix” contains a glossary, as well as technical data regarding the AS interface.

For further information regarding the AS interface, point your browser to www.as-interface.net.
关闭窗口
 
 
   
 
Copyright By bezer.com 2006 上海贝泽机电设备有限公司 版权所有  
电话:021-51501258 传真:021-51501257 地址:上海市静安区乌鲁木齐北路211号聚安大厦9F908室 邮编:200040